Western Australian mining company Mining Resources Limited (MRL), has acquired 10 new Komatsu HD1500-8 dump trucks, with the aim to upgrade their fleet and become more efficient, with the new machines increasing efficiency by 9.2%.
The company’s technological point of difference has helped solidify its position as a leading Mining Services company, with earnings from its Mining Services business at more than $300 million (EBIDTA) in the 2020 financial year.
In addition to its Mining Services business, Mineral Resources own its own operations, providing a great research and development platform. At the Iron Valley mine site, the 1.6km climb from the pit floor to the crushing facility and return was the test ground for some new equipment and MRL has gone about its determination with the precision of a Formula One team.
Komatsu commissions Australia’s first Tier 4 Final ultra-class mining truck
Downer takes Australia’s first Komatsu 830E-5 dump trucks
According to MRL, the cycle time with existing dump trucks was 23.84 minutes, but a new faster machine was capable of completing the journey in 21.63 minutes – increasing efficiency by 9.2 percent.
Significantly, the newly available vehicle also increased payload by 10 tonnes, enabling MRL to complete its entire process with the need for one fewer vehicle in its fleet.
“Following the success of the HD1500-8, MRL placed a milestone order for 10 of our machines,” Komatsu sales person Jason Lambert said.
The first of Komatsu’s HD1500s went into service with MRL prior to Christmas 2020, and the remaining nine are scheduled to be road freighted from Perth in the first quarter of 2021.
“From a miner’s perspective, cost is a major determinant – capital cost, life cycle cost and productivity,” Mr Lambert said.
“In this instance, there was a consistent theme of 10 percent improvement – in purchase cost, payload and operating efficiency – an additional 10 tonnes, 10% faster and 10% cheaper.
“But increasingly, there’s also the consideration of health and safety.”
The Komatsu HD1500-8’s Collision Awareness System incorporating eight on board radars and six cameras combined by one algorithm into a 360-degree overhead view of surrounding conditions, was a major boon to operators.
In-cabin ergonomics including specific cooling systems, low vibration operation and noise attenuation pegged at 72 decibels met contemporary operator expectations.
As with Formula One technology, the operator had the option of dialing down fuel use in a range from 90 litres per hour, to 80 litres per hour to achieve a full two shifts of operation between refueling.
A combined fuel stop, and driver change is standard motor racing practice to improve efficiency.
“The pit depth at Iron Valley is 160 metres, and it’s a 10 percent gradient from the pit floor to the top of the pit with another 900 metres from the top of the pit to the crusher,” Mr. Lambert said.
“The HD1500-8 climbs at 13 km/h, achieves 60 km/h on the flat and descends at 22 km/h.
“The operator can alter the fuel use according to gradient and also the load for the return trip to the floor.
“It’s as if the HD1500-8 has been purpose built for the mine and in many respects, that is the case.
“Increasingly we’re capable of working with each specific operator to fine tune our machine to their exact requirements.
Read more Mining Safety News
Add Comment